Serious inquiries contact Ezra at (918) 991-2586.
Essentials
- VIN: 1FA6P8CF0J5178859
- Title Status: Clean Title
- Chassis Mileage: 24,500
- Build Mileage: 10,000
Description
~1000whp 2018 Ford Mustang GT Premium/PP1 in Magnetic with 24,500 (Chassis) miles for sale! This Mustang is powered by a built/sleeved gen 3 5.0L Coyote that’s topped with a gen 5 3.0L Whipple supercharger, and mated to a 10R80 10-speed automatic transmission with McLeod clutches. Additional build highlights include ID1050X injectors, Division X triple pump dual regulator fuel setup, Stainless Works long tubes, full 3” Corsa Xtreme exhaust, DSS 1-piece aluminum driveshaft, Ford Performance 1500hp axles, and more. Modifications were installed by the owner, and tuning was completed via nGauge by Rob Shoemaker at Palm Beach Dyno (at the time), could use a re-tune for startup (sometimes have to start twice, after which it idles perfectly). The car hasn’t been on a dyno, however it should be over 1000whp, mid 4 second 60-130 car reliably, 4.20s on a good pass with 1 passenger in it. The car does need front tires (a touch too wide and barely rub), and one front wheel (was bent by the tire shop, priced accordingly). Some receipts are available! Clean title!
Factory Options
- Magnetic Metallic Exterior
- Premium
- Performance Pack 1
- 6-Piston Brembo Brakes
- Heated & Cooled Seats
- Digital Dash
- 10R80 10-Speed Automatic Transmission
Modifications
Engine:
- Sleeved Gen 3 Block
- Boostline I-Beam Rods w/ ARP 2000 Rod Bolts
- JE 2618 Pistons, Heavy Wall Wrist Pins 13.5:1
- Stock “BOSS” Crankshaft
- .001 Main & Rod Bearings (Clevite/King)
- ARP Main/Head Studs
- ARP Cam Tower/Cam Phaser Bolts
- ARP DI Pump Bolts
- Stock Cams
- MMR Billet Secondary Chain Flip Bracket
- Billet Timing Guides w/ E85 Strips
- Billet Secondary Chain Guides
- Factory MLS Head Gaskets (OEM)
- Billet Rear Main Seal
- Billet Oil Pump Gears/Crank Sprocket
- Billet Primary Chain Tensioners
Supercharger System:
- Gen 5 3.0L Whipple Supercharger
- Upgraded Heat Exchanger
- 132mm Throttle Body
- 3.00” Upper Pulley/Stock Lower (18-19Ibs)
Fuel System:
- Injector Dynamics ID1050X Fuel Injectors
- Division X Triple Pump Dual Regulator Fuel Setup w/ (3) 525 Hellcat Pumps
Exhaust:
- Stainless Works Long Tube Headers
- Full 3” Corsa Xtreme Exhaust
Drivetrain:
- 10R80 10-Speed Automatic Transmission w/ McLeod Clutches
- Driveshaft Shop 1-Piece Aluminum Driveshaft
- Ford Performance 1500hp Axles
Suspension:
- Solid Differential Bushings/Steeda IRS Supports
- Viking Double Adjustable Rear Shocks
- BMR Drag Springs
Image Gallery
