Serious inquiries contact Rommel at (305) 395-9477.
Essentials
- VIN: WUABWGFF8LA902134
- Title Status: Clean Title
- Chassis Mileage: 30,000
- Build Mileage: 9,000
Description
1025whp 2020 Audi RS3 in Nardo Gray with 30,000 (Chassis) miles for sale! This heavily modified RS3 packs a punch with a strong foundation to support just north of 1000whp, a stellar build completed by RSP Automotive in Sarasota, FL. Beginning with a built engine that’s coupled with a JDY 6870 turbo kit, power generated from this combination is transferred to the Quattro all-wheel-drive system through a built 7-speed dual-clutch transmission (both engine and transmission were built by Arnold Lee at Pagparts). The engine build consists of JE stock comp pistons, Brute I-beam rods, Ferrea valves/springs/retainers, coated bearings, upgraded ARP 625 head studs, and Stav Built intake plenum/runners, just to name a few. A Pag Parts dual pump fuel system handles fuel delivery along with a set of ID1700 fuel injectors. Following the built DCT, the drivetrain also features a Wavetrac LSD, Driveshaft Shop rear axles, ARP guibo hardware, and a Syvecs Haldex controller. Additional key components include a TiAL Q BOV/MVR wastegate, Race 3 1100 core intercooler, Melen TCU valved 3.5” exhaust, stock fixed front shocks/springs with custom spec Penske Racing shocks/custom springs, 18” Neuspeed wheels wrapped in fresh MPS4S tires, ECS carbon diffuser, Karbel carbon fenders, and more. Tuning was completed by Darin Dichiara via DS1, the car has 4 maps, yielding 700, 840, 950, and 1025whp (48-49psi), respectively, in Florida heat. The car sped past the 1/4-mile mark in 9.68s at 153mph with a 1.70 60’ at full weight, and went 60-130 in 4.2s with a full trunk. There’s tons of potential for an 8-second car with a better 60’ and weight reduction. Service intervals were every 2K miles, and it was completed by RSP Automotive in Sarasota, FL with fresh oil changes/plugs. A compression test was performed recently, and it came back with a clean bill of health. More videos, photos, dyno graphs, compression test, etc. can be provided upon request. Only 9K miles on the build! Clean title and Carfax, no accidents!
Modifications
Engine:
- JE Stock Comp Pistons
- Brute I-Beam Rods
- Ferrea Valves, Springs & Retainers
- Coated Bearings
- Upgraded ARP 625 10mm Head Studs
- StavBuilt Intake Plenum (OEM CF Insert) & Runners
- Redline Titanium 5” Intake Painted Black
- Artek PCV + Catch Can
Turbo System:
- JDY 6870 Turbo Kit w/ .96 AR
- TiAL Q Blow Off Valve
- TiAL MVR Wastegate
- Race 3 1100 Core Intercooler
Fuel System:
- Injector Dynamics ID1700 Fuel Injectors
- Pag Parts Dual Pump Fuel System w/ Stavbuilt Fuel Rail & Upgraded RSP
- 5 & 10 Micron Fuel Filters
Exhaust:
- Melen TCU Valved 3.5” Exhaust
Electronics/Tuning:
- Syvecs Haldex Controller
- DD Tuning TCU File
- Darin 5 Bar MAP Sensor
- Tuned by Darin on DS1
Drivetrain:
- DCT 1300 Clutch Kit w/ Billet Lid
- Upgraded Iroz Flywheel
- Billet Oil Tubes
- Wavetrac LSD
- Driveshaft Shop Rear Axles
- ARP Guibo Hardware
- DSG Catch Can
Suspension:
- Stock Fixed Front Shocks & Springs w/ Custom Spec Penske Racing Shocks/Custom Springs (Spec’d by PJ at 529)
- JXB MQB Spherical Trailing Arm Bushing Upgrade (PJ at 529)
- JXB MQB Spherical Rear Lower Control Arm Inner Bushing Upgrade (PJ at 529)
Wheels & Tires:
- 18” Neuspeed Wheels
- Fresh MPS4S Tires
Interior:
- Suede & Carbon Fiber Steering Wheel (Not Pictured)
Exterior:
- ECS Tuning Rear Carbon Diffuser
- Karbel Carbon Fenders (OEM Mint Fenders Included)
- Euro Spec (Vegh Tamas) Crash Bar Powder Coated Black
Image Gallery
