This vehicle has been sold, however more vehicles can be viewed here.
Essentials
- VIN: 1G1YN2DT8A5800949
- Title Status: Clean Title
- Chassis Mileage: 6,432
Description
1189whp 2015 Chevrolet Corvette Z06 3LZ Z07 in Shark Gray with 6,432 (Chassis) miles for sale! This menacing C7Z was sent to Redline Motorsports in Florida to receive a large-scale build, powered a fully built LT4 that’s matched with an F1A-94 ProCharger system and backed by a $28K RPM 2-speed powerglide transmission/RPM billet 9” rear. This build features a laundry list of top-quality components, backed by receipts for the work that was performed, and all brought together with tuning from Jekyll & Hyde Performance. with an output of 1189whp through the powerglide. The car runs 8’s in the 1/4-mile with no nitrous, the new glide has a loose converter, and that change would make it a solid mid 8-second car. The RPM powerglide and billet 9” only have a handful of passes on them, just enough to dial in the Holley port fuel system and make sure the car runs as straight as an arrow. The stock 8-speed automatic transmission/RPM Stage 3 rear differential will be included along with 300M axles, OEM shifter/interior piece that goes around it, and the stock hood. Open to trades. Dyno and time slips available! Clean title in hand!
Modifications
Engine:
- Stock LT4 Engine Block
- Finished Honed w/ Deck Plates to 4.070” Finish Bore
- Line Hone Main Bearing Journals
- Deck Block
- Manley Forged Steel LT4 Crankshaft 4.00” Stroke
- Manley Forged Steel 6.125” Connecting Rods w/ ARP 2000 Bolts
- Manley Forged Aluminum “Turbo Tuff” Pistons (10.8:1)
- Total Seal Piston Rings
- Clevite Coated Engine Bearings
- MLS Head Gaskets
- Redline Phase 6 Hydraulic Roller Camshaft, .675”/.675” 244/232 116 LSA 32% Fuel Lobe
- GM Performance Race Hydraulic Lifters
- Redline Dual Valve Springs w/ Titanium Retainers
- .080” Chromoly Pushrods
- Stock Rockers w/ Comp Cams Trunnion Kit
- Stock LT4 Cylinder Heads w/ Titanium Intake Valves, Stainless Steel 1-Piece Exhaust Valves, Milled Deck Surface, New Valve Guides
- ARP 2000 Head Bolts
- ATI Lower Crank Balancer
Supercharger System:
- F1A-94 ProCharger Supercharger System
- Custom Air-to-Water Intake Manifold
Nitrous System:
- Custom Direct Port Nitrous System
- High Flow Solenoids
- ProMax Controller
Fuel System:
- Supplement Fuel System
- Port Fuel w/ 1000cc Fuel Injectors
- Holley HP Supplement Fuel Controller Kit
- Weldon External Fuel Pump
Exhaust:
- American Racing 2” Race Headers
- Bullet Mufflers
Cooling:
- Remote Ice Water Tank w/ Rule 2000 Pump
- HD Transmission Cooler w/ Lines
Electronics:
- Crawford Control Module
- MSD 2-Step
Drivetrain:
- RPM Transmissions 2-Speed Powerglide w/ Reid Billet Case, Manual Valve Body & Transbrake
- SFI Approved Bellhousing
- SFI Flywheel
- PTC Torque Converter 4000-4200 Stall Speed
- Precision Powerglide Shifter
- Setup w/ C02 System For Shifting Off Holley Controller
- RPM Transmissions Rear Differential w/ Custom 9” Center Section
- 3.20:1 Rear Gears w/ 35 Spline Spool
- Driveshaft Shop Axles
- Custom Torque Tube
- Custom Extreme Duty Driveshaft Shop Prop Shaft 3.5”
- Billet Heat Treated Cone Coupler
Suspension:
- Menscer Custom C7Z Coilover Kit
- TRZ Billet Front Coilover Shock Mounts
Wheels/Tires & Brakes:
- 18x6 & 15x10 Weld Racing RT-S S77 Wheels
- Mickey Thompson Front Runner Tires
- 275 Mickey Thompson Radial Pro Tires
- 15” Rear Conversion
Image Gallery
